Product Introduction

Product Advantages:

High Carbon Content and Low Impurities

Fixed carbon ≥98.5%, extremely low sulfur and ash content, reducing inclusion formation during steelmaking and improving steel purity.

Excellent Electrical and Thermal Conductivity

The graphitized structure imparts high electrical conductivity (3-5 times that of ordinary calcined coke) and thermal conductivity, making it suitable for applications such as electrodes and heat exchangers.

Fast Absorption and Stable Performance

It dissolves rapidly during steelmaking (absorption rate >95%) and releases carbon smoothly, avoiding localized over-carbonization.

Environmental and Economical

Low ash content (<0.5%) reduces dust emissions, meeting environmental requirements; high cost-effectiveness reduces overall costs.

Applications: Covering metallurgy, new energy, and high-end manufacturing.

Steelmaking

Carburizer: Adjusts carbon content in electric furnace steelmaking, improving steel strength and hardness.

Spheroidizer Carrier: Combined with magnesium alloys, it promotes graphite spheroidization in gray cast iron, improving cutting performance. Foundry Industry

Inoculant: Combined with ferrosilicon and calcium-silicon alloys, it refines cast iron grains and reduces shrinkage defects.

Molding Sand Additive: Improves sand mold thermal conductivity, accelerates casting cooling, and increases production efficiency.

New Energy Sector

Lithium Battery Anode Material: Serves as an artificial graphite precursor, ball-milled and coated for use in power lithium batteries to extend cycle life.

Fuel Cell Bipolar Plates: Leveraging its high conductivity and corrosion resistance, it replaces traditional graphite plates and reduces costs.

Other Applications

Brake Materials: Compounded with resins and friction agents to create high-performance brake pads, enhancing wear resistance and thermal stability.

Refractory Materials: Serves as a carbon source additive to improve the corrosion resistance of magnesium-carbon bricks and aluminum-carbon bricks.

Product Parameter(Specification)

Item	Fixed Carbon (%min)	Sulfur (%max)	Ash (%max)	Volatile Matter (%max)	Nitrogen (max)	Moisture (%max)
ZC-GPC-01	98.5	0.03	0.7	0.8	200ppm	0.5
ZC-GPC-02	98.5	0.05	0.7	0.8	300ppm	0.5
ZC-GPC-03	98	0.05	1.0	1.0	300ppm	0.5
ZC-GPC-04	98.5	0.3	0.7	0.8	500ppm	0.5
ZC-GPC-05	98	0.5	0.7	1.0	500ppm	0.5
Size:0-0.2mm,0.2-1mm,1-5mm,5-10mm or according to your requirement