Product Introduction
High-quality petroleum coke is converted into 2-6mm graphitized petroleum coke (GPC), a high-purity carbon material, via calcination, ultrahigh temperature graphitization, fine crushing, and expert particle size screening. The product features a stable hexagonal layered graphite crystal structure, a blackish-gray metallic sheen, and consistent particle size control between 2 and 6 mm, with very little fine powder and large particles.
This product has very low levels of sulfur, nitrogen, and ash contaminants and a very high fixed carbon content. It is a premium carbon raiser and carbon additive made especially for the metallurgical, precision casting, and big and medium-sized steelmaking industries. It completely satisfies the demanding production requirements of premium metal smelting.
Product Advantages
- 1. High Carbon Raising Rate and Stable Performance: The whole crystal structure of graphite increases carbon molecules' activity, causing them to dissolve quickly in molten metal. Compared to regular calcined coke, the carbon increasing rate can reach above 95%. Carbon content changes during smelting are successfully avoided by the uniform and consistent carbon replenishment effect.
- 2. Exceptionally Low Impurities and Outstanding Purity: Sulfur concentration as low as 0.03%–0.05%, fixed carbon content ≥98.5%, low nitrogen, low ash, and low volatility. During the smelting process, no hazardous contaminants are emitted, hence increasing the purity of steel and cast iron and preventing product quality flaws brought on by excessive sulfur and nitrogen.
- 3. Scientific Particle Size and Reduced Loss: A specific standard particle size of 2–6 mm prevents the problems of big particles dissolving slowly and small powder materials being prone to floating and excessive burn-off. It enables complete contact with molten metal, thus lowering smelting burn-off rates and saving businesses money on raw materials.
- 4. Energy-Saving and Highly Efficient, Cost Reduction and Efficiency Improvement: By shortening the smelting cycle, rapid carbon dissolving successfully lowers fuel and electric furnace power consumption. It can lower the amount of pig iron used and raise the scrap steel ratio throughout the smelting process, hence lowering business production costs overall.
- 5. Stable Quality and Wide Adaptability: Consistent batch standards and no variations in quality are guarantyd by standardized and strict production procedures. It satisfies the high-end production requirements of ductile iron, gray iron, special steels, and precision castings and is suitable with a variety of smelting and casting methods.
Application Areas
1. Steelmaking Industry
It can be used to make a variety of special steels, including carbon steel and alloy steel, and is a very effective carbon raiser in electric arc furnace and converter steelmaking. It may decrease impurity residues, increase steel's strength and toughness, and steadily control the carbon level of molten steel.
2. Foundry and Precision Casting Industry
For ductile iron, gray iron, and precision castings, it is a perfect carbon raiser and inoculant. It may effectively decrease porosity and shrinkage faults in castings, optimize the distribution of graphite in castings, enhance their density and mechanical qualities, and boost the production of completed goods.
3. Aluminum Smelting and Non-ferrous Metals Metallurgy
It is used as a conductive material and carbon additive in electrolytic aluminum and non-ferrous metal smelting, which results in low impurity levels, steady electrolysis effects, and efficient equipment wear reduction.
4. High-Temperature Industries and Carbon Materials
Thermally and electrically conductive fillers, high-temperature crucibles, high-purity graphite components, and other high-temperature industrial auxiliary materials may all be processed with it.
5. Additional Industrial Domains
used extensively in the chemical, equipment, and new material processing sectors as a wear-resistant additive, high-temperature heat dissipation material, and industrial reaction reduction agent.
Why Choose Us
1. Outstanding Quality and Consistent Performance
High carbon enrichment rates, very low impurities, stable performance, and little batch-to-batch variation are produced using an ultrahigh temperature full graphitization process that strictly controls the 2-6 mm standard particle size. This effectively stabilizes customer production quality and lowers product defect rates.
2. High Cost-Effectiveness, Direct Supply from the Source
By removing intermediaries and offering consumers high-quality, reasonably priced carbon materials, factory direct supply guaranties controlled quality and transparent pricing, helping businesses become more competitive in the market.
3. Dependable Provision and Prompt Delivery
A large-scale production base with sufficient inventories of both raw materials and completed goods guaranties a steady supply over the long term and can manage a variety of urgent large orders. The timely and secure delivery of goods is guarantyd by standardized logistics management.
4.Full-cycle service and one-stop guaranty: We offer thorough and attentive service, providing a one-stop solution to all your procurement and usage challenges. This includes pre-sales technical guidance and sample testing, order follow-up during the sales process, after-sales problem solving, and long-term technical support.
5. Excellent reputation and long-term win-win cooperation: Our products are sold to numerous countries and regions, gaining long-term recognition and trust from clients in the metallurgy, casting, and steelmaking industries thanks to our years of experience in the field and mature experience in both domestic and international trade. We offer consistent, long-term collaboration guaranties to each and every client while upholding the company ethic of integrity.


Product Parameter(Specification)
|
Item |
Fixed Carbon |
Sulfur |
Ash |
Volatile Matter |
Nitrogen |
Moisture |
|
ZC-GPC-01 |
98.5 |
0.03 |
0.7 |
0.8 |
200ppm |
0.5 |
|
ZC-GPC-02 |
98.5 |
0.05 |
0.7 |
0.8 |
300ppm |
0.5 |
|
ZC-GPC-03 |
98.5 |
0.15 |
0.7 |
0.8 |
300ppm |
0.5 |
|
ZC-GPC-04 |
98.5 |
0.3 |
0.7 |
0.8 |
500ppm |
0.5 |
|
ZC-GPC-05 |
98.5 |
0.5 |
0.7 |
1.0 |
500ppm |
0.5 |
|
Size:0-0.2mm,0.2-1mm,1-5mm,5-10mm or according to your requirement |
||||||
Packaging & Shipping
Packing Details:
25kg small bags into one jumbo bag or 1mt jumbo bag or according to customers' requirements
Port: Tianjin Port, Qingdao Port
Leading Time: Shipped in 15-30 days after payment

Product Qualification

Deliver,shipping and serving
1. We prefer payment through T/T, L/C, D/P; Western Union and Paypal are also workable.
2. By courier, like DHL, UPS, Fedex. That is door to door, usually, 5-7 days to arrive.
By air transport, usually, 3-4 days to arrive.
By sea transport, usually, 15-30 days to arrive.
If your delivery time is urgent, we recommend you choose express or air freight. This applies to samples or small batches of goods.
If your delivery time is not very urgent, we recommend you choose sea transportation, it is very cheap.
Hot Tags: 2-6mm graphitized petroleum coke, China 2-6mm graphitized petroleum coke manufacturers, suppliers, factory, graphitized petroleum coke domestic market, graphitized petroleum coke nitrogen content, graphitized petroleum coke price, graphitized petroleum coke international market, graphitized petroleum coke characteristics, graphitized petroleum coke










