Zhong Carbon Energy Co., Ltd.

enLanguage

What are the differences in quality standards for graphitized petroleum coke for different applications?

Aug 01, 2025 Leave a message

The quality standards for graphitized petroleum coke vary significantly depending on the application. Key differences are reflected in key indicators such as fixed carbon content, sulfur content, ash content, volatile matter, particle size, and trace elements. The following is a categorized explanation by major application areas:

 

I. Graphitized petroleum coke for steelmaking (as a recarburizer)

Core requirements: High carbon, low sulfur, and low ash content to ensure effective recarburization during the steelmaking process and minimize the impact on molten steel purity.

Key Differences:

  • Fixed carbon: Typically required to be ≥98.5%, with high-quality products reaching over 99% (the higher the carbon content, the greater the recarburization efficiency).
  • Sulfur content: Strictly controlled to ≤0.05% (sulfur can cause hot brittleness in steel and reduce steel quality).
  • Ash content: ≤0.5% (metal oxides in the ash can affect steel purity and increase inclusions).
  • Volatile matter: ≤0.5% (Excessively high volatile matter can generate gases at high steelmaking temperatures, leading to boiling of the molten steel and pore defects).
  • Particle size: Adjusted according to steelmaking process requirements, with 5-50mm granules commonly used (uniform particle size ensures a stable carbonization rate).

 

II. Graphitized Petroleum Coke for Batteries (Lithium Battery Anode Material Raw Material)

Core Requirements: Ultra-high purity, low impurities, and high crystallinity to meet battery conductivity and cycle performance requirements.

Key Differences:

  • Fixed Carbon: ≥99.9% (High carbon content ensures good conductivity).
  • Sulfur Content: ≤0.01% (Sulfur can corrode battery electrodes and reduce cycle life).
  • Ash Content: ≤0.03% (Metallic impurities such as iron, nickel, and copper are strictly controlled to prevent internal short circuits in the battery).
  • Trace Elements: The sum of iron (Fe), nickel (Ni), and vanadium (V) is ≤50 ppm (Impurities can reduce battery capacity and stability). Graphitization Degree: ≥95% (As determined by X-ray diffraction, a high degree of graphitization improves lithium ion intercalation and deintercalation efficiency).
  • Particle Size: Ultrafine powder with a concentrated particle size distribution (to ensure uniform electrode material).

 

III. Graphitized Petroleum Coke for Casting (Cast Iron Recarburization)

Core Requirements: Moderate carbon content, easy absorption, and a balance between cost and recarburization effectiveness.

Key Differences:

  • Fixed Carbon: 95%-98% (Cast iron requires a slightly lower carbon content than steelmaking, which can reduce costs).
  • Sulfur Content: ≤0.1% (Cast iron is less sensitive to sulfur than steel, but control is still necessary to prevent casting embrittlement).
  • Ash Content: ≤1.0% (Ash content requirements are more relaxed than in steelmaking, as cast iron requires slightly lower purity).
  • Particle Size: 1-3mm or 3-8mm (Moderate particle size allows for rapid dissolution in molten iron).

 

IV. Graphitized Petroleum Coke for Electrolytic Aluminum (Anode Material or Auxiliary Material)

Core Requirements: Low electrical resistivity, high oxidation resistance, and reduced energy loss during the electrolysis process.

Key Specifications:

  • Fixed Carbon: ≥98% (ensures electrical conductivity and reduces electrolytic cell resistance).
  • Sulfur Content: ≤0.5% (Sulfur produces harmful gases during electrolysis, corroding equipment, and polluting the environment).
  • Ash Content: ≤1.0% (prevents impurities from affecting electrolyte stability).
  • Resistivity: ≤15μΩ·m (low resistivity reduces energy consumption).
  • Particle Size: Depending on the anode forming process, granular (5-20mm) or powdered (used to adjust anode density) forms are available.

The differences in quality standards for different applications are essentially determined by their functional requirements. In practical applications, graphitized petroleum coke of the appropriate standard should be selected based on specific process requirements.