Zhong Carbon Energy Co., Ltd.

enLanguage

Comparison Of Graphite Petroleum Coke And Coal-Based Carbon Recombinants in Steelmaking: Carbon Recovery Rate And Cost Advantages

Jun 24, 2026 Leave a message

I. Core Indicator: Comparison of Measured Carbon Recovery Rate Data

 

The carbon recovery rate directly determines the actual consumption of carbon recombinants and is also the core factor that differentiates the overall cost of the two types of products. The measured data from multiple electric arc furnace steel mills for consecutive furnace runs are as follows:

 

Graphite Petroleum Coke (GPC) Carbon Recovery Rate

Through a high-temperature graphitization process above 2800℃, carbon atoms form a layered ordered crystal structure, which is easily wetted and rapidly dissolved by molten steel, with minimal floating and burning loss.

Ordinary low-sulfur graphite petroleum coke: Stable carbon recovery rate of 90%–93%. High-purity low-nitrogen graphite petroleum coke (S < 0.05%): Carbon recovery rate can reach 93%–95%. Smelting characteristics: Carbon content control precision ±0.05%, minimal carbon fluctuation between furnace runs, no need for multiple refuelings or extended smelting time.

 

Coal-based (calcined anthracite) carbon raiser carbon recovery rate:

Predominantly amorphous carbon structure, with poor wettability to molten steel, most raw materials float on the slag surface and are directly oxidized and lost at high temperatures, resulting in extremely high absorption rate fluctuations: High-quality calcined coal-based carbon raiser: Carbon recovery rate 65%–75%. Ordinary industrial coal-based carbon raiser: Carbon recovery rate only 50%–62%. Smelting characteristics: Multiple sampling and refueling of carbon raiser are required per furnace, resulting in large fluctuations in carbon equivalent, easily leading to carbon over- or under-carbon conditions, significantly extending the smelting time per furnace.

 

Intuitive Usage Conversion (Target: 0.3kg fixed carbon per ton of steel)

Graphite petroleum coke fixed carbon 98.5%, recovery rate 92%: Consumption ≈ 0.33kg/ton of steel

Coal-based carbon raiser fixed carbon 90%, recovery rate 68%: Consumption ≈ 0.49kg/ton of steel

Under the same carbon raising requirement, the consumption of coal-based carbon raiser per furnace is 48% higher, resulting in a significant increase in the basic raw material usage.

 

II. Comprehensive Cost Advantage Breakdown: Graphite petroleum coke is not just about unit price

 

Many buyers fall into the misconception that coal-based carbon raisers have a lower ex-factory price and therefore lower short-term procurement expenditures. However, considering raw material consumption, auxiliary materials, energy consumption, waste, and desulfurization alloy costs, the overall cost of using graphite petroleum coke is lower in the long run.

 

  • 1. Hidden Costs of Desulfurization and Alloy Auxiliary Materials (The Largest Hidden Expense in Steelmaking)

Coal-based carbon raisers inherently have excessive impurities: sulfur content 0.5%–1.8%, nitrogen content high, ash content 4%–6%;

Graphite petroleum coke has controllable impurities: high-quality products have sulfur ≤0.05%, nitrogen <300ppm, and ash content ≤1%.

Using coal-based carbon raisers: As the sulfur content of molten steel continues to rise, additional lime, desulfurizing agents, and ferromanganese alloys must be added to neutralize the sulfur, increasing the cost of desulfurization auxiliary materials by $7–12 per ton of steel; excessive sulfur can also cause hot brittleness in steel, directly scrapping spring steel, bearing steel, and high-strength alloy steel.

Using graphite petroleum coke: Almost no additional desulfurization investment, alloy loss reduced by more than 60%, suitable for high-end special steel export orders.

 

  • 2. Smelting Energy Consumption and Labor Costs: Coal-based carbon raisers dissolve slowly and have poor absorption rates, extending the smelting cycle of a single furnace by 4-8 minutes, leading to a simultaneous increase in electric furnace electricity costs and natural gas consumption. Furthermore, the need for furnace operators to take samples and replenish materials multiple times increases labor costs.

 

  • 3. Scrap Loss Costs: Excessive nitrogen and sulfur levels are the core causes of porosity, cracks, and substandard mechanical properties in steel. Long-term use of coal-based carbon raisers generally increases the scrap rate of castings and steel by 4%-9%; export orders suffer losses due to returns and rework at sea caused by substandard materials.

Low-sulfur, low-nitrogen graphite petroleum coke can increase the first-pass yield of steel to over 98%, avoiding losses from foreign trade order penalties and port delays.

 

III. Selection Recommendations for Different Steelmaking Scenarios

 

High-end special steel, export alloy steel, and precision forging steel mills:

Prefer graphite petroleum coke carbon raisers. Overseas buyers of high-end steel from Europe, America, and the Middle East generally strictly control the sulfur and nitrogen levels in molten steel. Graphite petroleum coke can reliably meet SGS material testing standards, avoiding export quality inspection failures. Our factory, as an integrated industrial and trading source manufacturer, can customize low-sulfur graphite petroleum coke with particle sizes of 2-5mm and 0-1mm, supporting FOB Tianjin and Qingdao ports for full container exports, with complete testing reports.

 

For ordinary construction rebar and low-requirement crude steel smelting:

Small steel mills with extremely limited budgets and no high-end export orders can use it in combination with coal-based carbon raisers in stages; however, factories with long-term large-scale production and export plans are still advised to gradually replace graphite petroleum coke to reduce long-term overall losses.

 

For scrap steel recycling and smelting in electric arc furnaces:

Scrap steel itself has large fluctuations in carbon and impurities. Using high-absorption-rate graphite petroleum coke can quickly stabilize the carbon equivalent, offsetting the problem of unstable scrap steel raw material quality and reducing furnace fluctuations.

 

IV. Summary: Graphite Petroleum Coke Offers Superior Overall Economic Advantages in Long-Term Production

 

Carbon Recovery Rate: Graphite petroleum coke's 90%+ significantly outperforms coal-based carbon raisers (50%–75%), resulting in substantial reductions in raw material consumption.

 

Overall Cost: Although the purchase price per ton of graphite petroleum coke is higher, the overall production cost per ton of steel is lower after factoring in auxiliary materials, energy consumption, scrap, and order losses.

 

International Trade Suitability: Its low sulfur, low nitrogen, and high purity meet global environmental metallurgical standards, and its material testing complies with regulations, making it suitable for long-term, stable procurement and large-scale long-term contracts with overseas steel mills.

For metallurgical enterprises aiming for overseas steel exports, stable production, and reduced quality control risks, graphite petroleum coke carbon raisers are the preferred carbon raw material, balancing quality with long-term cost reduction.