Key Advantages
1. Rapid Dissolution = Lower Electricity Bills
The fine fraction (0.5–1mm) creates a large contact surface in molten iron, initiating instant carbon absorption upon contact. Less time spent holding temperatures in the induction furnace directly lowers kilowatt-hour consumption per batch.
2. High Density = Zero Slag Burn-Off
The coarse fraction (1–5mm) provides the required mass to pierce through the surface slag layer. Instead of floating and oxidizing on top of the melt, the granules submerge deep into the turbulent liquid metal, maximizing actual yield.
3. Dust-Filtered Sizing = 0% Material Waste
We utilize multi-stage screening to remove all fines under 0.5mm. This prevents your raw material from being sucked into dust extraction hoods, keeping your shop floor clean and your carbon investment in the ladle.
Product Parameter(Specification)
|
Item |
Fixed Carbon |
Sulfur |
Ash |
Volatile Matter |
Nitrogen |
Moisture |
|
ZC-GPC-01 |
99 |
0.03 |
0.4 |
0.6 |
200ppm |
0.5 |
|
ZC-GPC-02 |
98.5 |
0.05 |
0.7 |
0.8 |
300ppm |
0.5 |
|
ZC-GPC-03 |
98.5 |
0.15 |
0.7 |
0.8 |
300ppm |
0.5 |
|
ZC-GPC-04 |
98.5 |
0.3 |
0.7 |
0.8 |
500ppm |
0.5 |
|
ZC-GPC-05 |
98.5 |
0.5 |
0.7 |
0.8 |
500ppm |
0.5 |
|
Size:0-0.2mm,0.2-1mm,1-5mm,5-10mm or according to your requirement |
||||||
Packaging & Shipping
Packing Details:
25kg small bags into one jumbo bag or 1mt jumbo bag or according to customers' requirements
Port: Tianjin Port, Qingdao Port
Leading Time: Shipped in 15-30 days after payment
Product Qualification
ISO 9001:2015 Certified
Our production system and quality management are fully certified under ISO 9001:2015, ensuring standardized manufacturing and traceably high quality across all batches.
Third-Party Inspection Supported
To give our clients complete peace of mind, we fully welcome pre-shipment sampling and testing by independent agencies such as SGS, BV, or Intertek upon request.
FAQ
Q: Is 0.5-5mm SGPC suitable for my medium-frequency induction furnace?
A: Absolutely. In fact, 0.5-5mm is the most recommended size for medium to large induction furnaces. The particles are heavy enough to sink into the turbulent melt while dissolving quickly enough to avoid extending your heating cycle.
Q: How does Semi Graphitized Coke compare to Calcined Petroleum Coke (CPC)?
A: SGPC undergoes a higher degree of thermal treatment than standard CPC. This results in higher fixed carbon (≥98.5%), lower sulfur (≤0.15-0.20%), and a more developed crystalline structure. This significantly improves the carbon absorption rate and speed in molten iron compared to standard CPC.
Hot Tags: 0.5-5mm semi graphitized petroleum coke, China 0.5-5mm semi graphitized petroleum coke manufacturers, suppliers, factory, semi graphitized petroleum coke, Low Sulphur Low Nitrogen Semi Graphitized Petroleum Coke, 0 2 1mm Semi Graphitized Petroleum Coke
